Hide metadata

dc.date.accessioned2020-05-13T18:17:13Z
dc.date.available2021-09-13T22:45:42Z
dc.date.created2019-10-08T13:39:04Z
dc.date.issued2020
dc.identifier.citationSingh, Sathya Prakash Kanas, Nikola Desissa, Temesgen Debelo Johnsson, Mats Einarsrud, Mari-Ann Norby, Truls Eivind Wiik, Kjell . Thermoelectric properties of A-site deficient La-doped SrTiO3 at 100–900 °C under reducing conditions. Journal of the European Ceramic Society. 2019, 1-7
dc.identifier.urihttp://hdl.handle.net/10852/75534
dc.description.abstractLanthanum doped strontium titanate is a potential n-type thermoelectric material at moderate and high temperatures. (La0.12Sr0.88)0.95TiO3 ceramics were prepared by two different routes, conventional sintering at 1500 °C and spark plasma sintering at temperatures between 925 and 1200 °C. Samples with grain size between 40 nm and 1.4 μm were prepared and characterized with respect to their thermoelectric transport properties at temperatures between 100 and 900 °C under reducing conditions (H2/H2O-buffer mixtures). The thermal conductivity was significantly reduced with decreasing grain size reaching a value of 1.3 W m−1. K−1 at 600 °C for grain size of 40 nm and porosity of 19%. Electrical conductivity increased with increasing grain size showing a maximum of 500 S cm−1 at 200 °C for a grain size of 1.4 μm. The highest figure-of-merit (zT) was measured for samples with 1.4 μm average grain size reaching 0.2 at 500 °C.en_US
dc.languageEN
dc.rightsAttribution-NonCommercial-NoDerivatives 4.0 International
dc.rights.urihttps://creativecommons.org/licenses/by-nc-nd/4.0/
dc.titleThermoelectric properties of A-site deficient La-doped SrTiO3 at 100–900 °C under reducing conditionsen_US
dc.typeJournal articleen_US
dc.creator.authorSingh, Sathya Prakash
dc.creator.authorKanas, Nikola
dc.creator.authorDesissa, Temesgen Debelo
dc.creator.authorJohnsson, Mats
dc.creator.authorEinarsrud, Mari-Ann
dc.creator.authorNorby, Truls Eivind
dc.creator.authorWiik, Kjell
cristin.unitcode185,15,17,0
cristin.unitnameSenter for materialvitenskap og nanoteknologi
cristin.ispublishedtrue
cristin.fulltextpostprint
cristin.qualitycode1
dc.identifier.cristin1734946
dc.identifier.bibliographiccitationinfo:ofi/fmt:kev:mtx:ctx&ctx_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.jtitle=Journal of the European Ceramic Society&rft.volume=&rft.spage=1&rft.date=2019
dc.identifier.jtitleJournal of the European Ceramic Society
dc.identifier.volume40
dc.identifier.issue2
dc.identifier.startpage401
dc.identifier.endpage407
dc.identifier.doihttps://doi.org/10.1016/j.jeurceramsoc.2019.09.024
dc.identifier.urnURN:NBN:no-78649
dc.type.documentTidsskriftartikkelen_US
dc.type.peerreviewedPeer reviewed
dc.source.issn0955-2219
dc.identifier.fulltextFulltext https://www.duo.uio.no/bitstream/handle/10852/75534/1/Paper%2B1-Cristin.pdf
dc.type.versionAcceptedVersion


Files in this item

Appears in the following Collection

Hide metadata

Attribution-NonCommercial-NoDerivatives 4.0 International
This item's license is: Attribution-NonCommercial-NoDerivatives 4.0 International